All Fronius Products

compact - lightweight and portable battery powered mobile and cable-less TIG welding In addition to mobile electrode welding, mobile TIG welding is now a reality thanks to the AccuPocket 150/400 TIG.

compact - lightweight and portable battery powered mobile and cable-less welding. AccuPocket welds all types of electrode (rutile, basic, CEL and specialpurpose electrodes) up to a diameter of 3.25 mm (0.13”). Steel, highalloy steels and aluminium are all suitable base metals.

Off-grid MMA welding with AccuPocket, a battery-driven manual electrode power source. There no longer has to be mains power nearby. Now jobs needing up to six 3.25 mm (0.13”) electrodes or up to eighteen 2.5 mm (0.1”) ones can be welded autonomously. For more substantial welding applications, a small, compact 2 kVA generator is sufficient. And without any limitations on the welding power or the quality of the arc. Far from it – thanks to AccuBoost Technology. The perfect interplay between the battery and the welding electronics also permits high welding voltage at high power. This prevents annoying arc-breaks.

The MagicWave 1700 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 170 A, is both light and robust and self-explanatory in operation. The power source is also ideally suited to portable use in chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and for pipeline construction.

The MagicWave 2200 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 220 A, is both light and robust and self-explanatory in operation. The power source is also ideally suited to portable use in chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and for pipeline construction.

The MagicWave 3000 is a fully digitally controlled TIG-AC/DC power source with Active Wave technology and is distinguished by an almost soundless yet highly stable arc. With an output of 300A it is both lightweight and robust, as well as being self-explanatory in its mode of operation. The power source is ideal for mobile use in chemical, container, machine and plant engineering, in fitting and installation companies, metal construction, maintenance and repair as well as pipeline construction.

The MagicWave 4000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 400 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.

The MagicWave 5000 is a fully digitally controlled TIG AC/DC power source with ActiveWave technology, and is characterised by the softest possible yet highly stable arc. It has an output of 500 A, is both light and robust and self-explanatory in operation. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.

TIME 5000 Digital, a digitised high-performance welding process with all the associated benefits: 100 % reproducible welding results, modular system principle, digital microprocessor control and outstanding weld properties.

Two wires - one process. With TimeTwin, controllable digital power sources work totally independently - with two separate filler wires - in just one gas nozzle and in a common weld pool. This shortens the cycle times and increases the weld quality and productivity in high-performance welding.

The TPS/i is a universal genius. It was conceived and designed from first principles, from the ground up. As a result, it has decisively improved the welding properties, optimised the communication between man and machine, and perfected the handling.

In structural-steel fabrication, reliability is the name of the game. This, in turn, necessitates sturdy, rugged tools. The same is true of steel welding. TransSteel has been created with precisely this in mind: a rugged and reliable partner that stands out for its intelligent appliance design and for being extremely easy to operate.

The goal while developing the new generation of TransPocket 150 devices was simple: to make the good better. Thanks to a fully digitised and intelligent resonance system, the control response has been improved, leading to better ignition, less spatter and a highly stable arc. Furthermore, the optimised housing has made the unit more robust than ever. The new type of electrode welding.

The goal while developing the new generation of TransPocket 180 devices was simple: to make the good better. Thanks to a fully digitised and intelligent resonance system, the control response has been improved, leading to better ignition, less spatter and a highly stable arc. Furthermore, the optimised housing has made the unit more robust than ever.

The TransPocket 2500 is a fully digitally controlled manual electrode power source with resonant intelligence. The ideal characteristic ensures the arc is always stable, even for example at mains voltages of up to 100 metres, or with fluctuating mains voltages (340 to 506 V) and during generator operation.

The TransPocket 3500 is a fully digitally controlled manual electrode power source with resonant intelligence. The ideal characteristic ensures the arc is always stable, even for example at mains voltages of up to 100 metres, or with fluctuating mains voltages (340 to 506 V) and during generator operation

The TransPocket 4000 Cel manual electrode power source has an output of 380 A. Fully digitised, the TransPocket 4000 guarantees unique reproducibility of the welding result and multiprocess ability. As the name suggests, the power source is completely cellulose-compatible, even in the vertical-down position. The main application areas are construction sites, shipyards, workshops and pipeline construction.

The TransPocket 5000 Cel manual electrode power source has an output of 380 A. Fully digitised, the TransPocket 4000 guarantees unique reproducibility of the welding result and multiprocess ability. As the name suggests, the power source is completely cellulose-compatible, even in the vertical-down position. The main application areas are construction sites, shipyards, workshops and pipeline construction.

The TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The integral wire-feed unit guarantees portable use on construction sites, in workshops and for maintenance and repair activities. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding.

The TransPuls Synergic 3200 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 320 A. The power source gives the best weld properties in every respect, and reproducible results time and time again. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 400 A, the TransPuls Synergic 4000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect, and reproducible results time and time again. With an output of 500 A, the TransPuls Synergic 5000 meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards. The multiprocess power source is suitable for MIG/MAG, TIG and electrode welding, as well as manual or robotic applications.

The powerful power sources are based on a tried and tested solution: two digitally controlled TransPuls Synergic 4000s are connected via a high-speed data interface, achieving a combined output of 720 A.

The powerful power sources are based on a tried and tested solution: two digitally controlled TransPuls Synergic 5000s are connected via a high-speed data interface, achieving a combined output of 900 A.

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit arcs and spray arcs enables the best weld properties in every respect, and reproducible results time and time again. With its modular design, the TransSynergic 4000 (400 A) meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards.

The fully digitised and microprocessor-controlled MIG/MAG power source for short circuit arcs and spray arcs enables the best weld properties in every respect, and reproducible results time and time again. With its modular design, the TransSynergic 5000 (500 A) meets the highest demands of the automobile and component supply industry, equipment construction, chemical plant construction, machine and tracked vehicle manufacturing, and in shipyards.

The powerful power sources are based on a tried and tested solution: two digitally controlled TransSynergic 4000s are connected via a high-speed data interface, achieving a combined output of 720 A.

The powerful power sources are based on a tried and tested solution: two digitally controlled TransSynergic 5000s are connected via a high-speed data interface, achieving a combined output of 900 A

The TransTig 1750 Puls is small, rugged and fully digitised. Weighing only 9.1 kg (20.17 lb), this TIG-DC power source is ideal for portable use under tough site-erection conditions or out in the field. The microprocessor controls the welding power source, delivering results such as an extremely stable arc and 100 % reproducible welding properties. The power source is suitable for use in applications up to 170 A.

The TransTig 2200 is a TIG-DC power source, and has an output of 220 A. It is both light and robust, self-explanatory in operation, completely digitised and delivers maximum power from a 230 V mains. The power source is also ideally suited to chemical, container, machine and plant construction, installation firms, metal construction, maintenance and repair companies, and for pipeline construction

The TransTig 2500 is a TIG DC power source that produces 250 A and, weighing in at 24 kg (53 lb), is one of the lightest TIG power sources with a 3-phase power supply. It is extremely easy to use, very intuitive in its operation, very robust, powerful and completely digitised. The power source can be used in many different applications: chemical, container, machinery and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, the aerospace and shipbuilding industries, not to mention all types of installation, maintenance and repair companies.

The TransTig 2500 is a TIG DC power source that produces 300 A and, weighing in at 24 kg (53 lb), is one of the lightest TIG power sources with a 3-phase power supply. It is extremely easy to use, very intuitive in its operation, very robust, powerful and completely digitised. The power source can be used in many different applications: chemical, container, machinery and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, the aerospace and shipbuilding industries, not to mention all types of installation, maintenance and repair companies.

The TransTig 4000 is a TIG-DC power source, and has an output of 400 A. It is extremely easy to use, practically self-explanatory in operation, very robust, powerful and completely digitised. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.

The TransTig 5000 is a TIG-DC power source, and has an output of 500 A. It is extremely easy to use, practically self-explanatory in operation, very robust, powerful and completely digitised. The power source can be used in many different fields: chemical, container, machine and plant construction, pipeline construction, automotive and tracked vehicle manufacturing, aerospace industry and shipbuilding, as well as by all types of installation, maintenance and repair companies.

At 250 A, the VarioStar 2500 is a stepped MIG/MAG power source with an integral 2-roll drive. It is easy to handle, has a robust design, and can be used in many different fields.

At 310 A, the VarioStar 3100 is a stepped MIG/MAG power source with an integral 2-roll drive. It is easy to handle, has a robust design, and can be used in many different fields.

At 340 A, the VarioSynergic 3400 is a stepped and microprocessor-controlled MIG/MAG power source with an integral 4-roll drive. Synergic operation makes welding the easiest thing in the world. Set the sheet thickness and filler metal, and away you go! Robust and reliable, the VarioSynergic is suitable for heavy steel, machine and equipment construction, plant and container construction, and for use in workshops.

At 400 A, the VarioSynergic 4000 is a stepped and microprocessor-controlled MIG/MAG power source with an integral 4-roll drive. Synergic operation makes welding the easiest thing in the world. Set the sheet thickness and filler metal, and away you go! Robust and reliable, the VarioSynergic is suitable for heavy steel, machine and equipment construction, plant and container construction, and for use in workshops.

At 400 A, the VarioSynergic 4000-2 is a stepped and microprocessor-controlled MIG/MAG power source with separate wire-feed unit and 4-roll drive. Synergic operation makes welding the easiest thing in the world. Set the sheet thickness and filler metal, and away you go! Robust and reliable, the VarioSynergic is suitable for heavy steel, machine and equipment construction, plant and container construction, and for use in workshops.

At 500 A, the VarioSynergic 5000 is a stepped and microprocessor-controlled MIG/MAG power source with an integral 4-roll drive. Synergic operation makes welding the easiest thing in the world. Set the sheet thickness and filler metal, and away you go! Robust and reliable, the VarioSynergic is suitable for heavy steel, machine and equipment construction, plant and container construction, and for use in workshops.

At 500 A, the VarioSynergic 5000-2 is a stepped and microprocessor-controlled MIG/MAG power source with separate wire-feed unit and 4-roll drive. Synergic operation makes welding the easiest thing in the world. Set the sheet thickness and filler metal, and away you go! Robust and reliable, the VarioSynergic is suitable for heavy steel, machine and equipment construction, plant and container construction, and for use in workshops.