Clarke supply the following products below. Click on a product below to find a stockist.
'Clarke'
This stylish 100amp MIG welder features easier internal access and a smooth protective housing. An excellent choice for the DIY enthusiast whether for work on the car or jobs around the home and garden. Download Product Manual Power settings from 30 - 100amps. 40A at 60% duty cycle Ventilated cooling to maintain duty cycle. Welds mild steel up to 5mm. Also accepts aluminium & stainless steel wire. Fully variable electronic wire speed control - Uses 0.6 / 0.8mm wire up to 5kg spool. Operates from 13amp, 230v domestic power supply. Open circuit Volts - 21-28V Thermal overload protection with auto reset & Ventilated cooling to maintain duty cycle. Everything to start welding is included - CO2 gas, regular, mild steel wire, professional style torch assembly & helpful instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Lightweight and highly portable this 230v mains powered, propane gas fired heater is ideal for small workshops or the home garage user. Max output 35,000 Btu`s/hr (approx. 10.25kW) Complete with regulator & heavy duty gas hose Fuel safety cut out in the event of overheat, flame or power failure Approved to Calor, GS & DVGW standards 230v, 1ph power input Dimensions (LWH) 340x180x270mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This powerful security light is ideal outside your home or premises. With 96 LEDs it produces 500 lumens of bright light and has a long operating life of 50,000 hours. It has a PIR motion sensor that activates the light when movement is detected up to a distance of 10 meters and a 180° angle. Supplied with an adjustable bracket, the light can be directed in various positions. Using LED bulbs it uses up to 80% less energy than a halogen equivalent and is significantly cheaper to run. Includes controls to vary sensitivity levels, length of activation and darkness activation. Wattage: 6W Light Output (Lumens): 500 Dims (LWH): 140x190x300mm Weight: 1.2kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A step up from the basic home user model, this 110amp arc welder is ideal for simple fabrication and repair jobs. The extra power simply provides more flexibility in the welding process. Variable power control - 30 to 110 amps (viewing window shows appropriate rod size & current selected). Smart protective steel housing incorporating side ventilators to help maintain duty cycle Accepts welding electrodes 1.6 - 2.5mm broadly matching workpiece thickness Thermal overload protection with auto reset. Operates from 230v, 13amp, 1ph power supply. Supplied complete with standard welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush & full instructions. Dimensions (LWH) 440x235x300mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A general purpose 140 amp arc welder that's an ideal choice for numerous users. Operating equally effectively from both 230v & 110v mains input power means it can be used not just in garages, & workshops but on construction sites which are limited to a 110v supply. Sturdy build quality & long term reliability ensures good service for contractors and mobile welders. Variable power control - 40 to 140 amps (viewing window shows appropriate rod size & current selected). Smart protective steel housing incorporating side ventilators to help maintain duty cycle. Accepts welding electrodes 1.6 to 3.25mm broadly matching workpiece thickness. Thermal overload protection with auto reset. Operates from both 110v, 1ph & 230v, 1ph power supplies. Supplied complete with standard welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush & full instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
With 140 amps maximum power, and heavier duty components, this entry model to our professional arc welding range is great for a wide range of metal fabrication, repair and maintenance work. Selectable welding output power - 40 to 140amps (viewing window shows appropriate rod size & current selection) Turbo fan cooling for extended duty cycle. Strong ventilated steel casing Accepts welding electrodes 1.6mm to 3.25mm to match workpiece size Thermal overload protection with auto reset Power input 230v, 1 phase up to 3.5Kw Supplied complete with welding leads, electrode holder, earth clamp face shield, chipping pick / wire brush & comprehensive instructions Dims. (LWH) 400x250x300mm. Weight 19kgs
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Quality construction, power and control - the Arc /Tig 150, 150Amp inverter delivers regulated DC power for superior quality ARC welding. Electronically controlled output also facilitates smooth and precise TIG welding. Precision power control, at relatively low amps, means auto bodywork & extremely thin sheets of mild & stainless steel can be Tig welded without risk of causing damage or warping.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
With its ample 150 amp output this sturdy & robust arc welder is a great choice for home DIY use. Ideal for handymen, home craftsmen, & automotive enthusiasts maintaining or restoring vehicles. The increased range of operation gives the enthusiast plenty of scope for vehicle repairs and general fabrication at an exceptional price! Variable power control - 40 to 150amps (viewing window shows appropriate rod size & current selected). Smart protective steel housing incorporating side ventilators to help maintain duty cycle. Accepts welding electrodes 1.6 - 3.25mm broadly matching workpiece thickness. Thermal overload protection with auto reset. Operates from 230v, 1ph power supply. Supplied complete with standard welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush & full instructions. Dimensions (LWH) 440x235x300mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Top of the range performance for serious DIY fabrication and automotive repair. This solid, dependable 185 amp output arc welder gives users the confidence and ability to tackle metal structures of many kinds. Variable power control - 50 to 185 amps (viewing window shows appropriate rod size & current selected). Smart protective steel housing incorporating side ventilators to help maintain duty cycle. Accepts welding electrodes 1.6 - 4.0mm dia. broadly matching workpiece thickness. Thermal overload protection with auto reset. Operates from 230v, 1ph power supply Supplied complete with standard welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush and full instructions. Dimensions (LWH) 440x235x300mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This mid range 180 amp professional Arc welder combines performance and versatility with excellent value for money. - 35 - 180amps (viewing window shows appropriate rod size & current selection). Turbo fan cooling for extended duty cycle, & strong ventilated steel casing. Accepts welding electrodes 1.6mm to 4mm to match workpiece size. Thermal overload protection with auto reset. Power input 230/400v, 1ph up to 4.5Kw. Supplied complete with welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush & comprehensive instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Able to achieve the same top class results as the 195TE and 230TE, a lower duty cycle enables this fully featured 185amp MIG welder to be offered at an incredibly low price. Multiple power settings from 30 - 185amps. Welds mild steel up to 7mm. Also accepts aluminium & stainless steel wire. Turbo fan cooling for enhanced duty cycle & longer life. Accepts 0.6 / 0.8mm wire spools up to 15Kg Fully variable electronic wire speed control plus independent timer for accurate spot / tack welding. Operates from 230v, 1ph power supply. Thermal overload protection with auto reset Supplied complete with professional torch / hose assembly, gas regulator, earth clamp, cables, face shield & full instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A sturdy mid-range single phase stick welder, capable of handling rods up to 4mm diameter; suitable for a wide range of metal construction and repair work, both automotive and industrial. Welding current variable, 40 - 210 amps. Turbo fan cooling for extended duty cycle. Accepts welding electrodes 1.6 to 4mm dia. Thermal overload protection with auto reset. Power input 230/400v, 1 phase up to 5kW. Supplied complete with welding leads, electrode holder, earth clamp, face shield, chipping pick/;wire brush, wheels, handle and all instructions. Dimensions (LWH) - 440x280x320mm.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This professional 240 amp Arc welder features an extra heavy duty transformer for superior performance, with a welding capacity up to 5mm thickness. - 50 - 240amps (viewing window shows appropriate rod size & current selection). Turbo fan cooling for extended duty cycle, & strong ventilated steel casing. Accepts welding electrodes 2mm to 5mm to match workpiece size. Thermal overload protection with auto reset. Power input 230/400v, 1ph up to 6.5Kw. Supplied complete with welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush, wheels & handle, and comprehensive instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This powerful 3-phase, 260 amp MIG welder delivers versatile performance with consistantly good welds. Designed to meet the regular demands of industrial and automotive users alike. Multiple power settings - 30-260 amps. Welds mild steel up to 11mm thickness Turbo fan cooling for improved duty cycle Integral wire feed system accepts spools upto 15Kgs - Mild steel, Stainless steel & Aluminium Accepts wire sizes 0.6 / 0.8mm as standard - larger diameters with optional wire feed roller Includes fully variable wire speed control 0-22 mtrs/min plus timer for spot welding Operates from 3-phase, 400v power supply Includes welding torch & hose assembly, gas bottle regulator, earth lead, face shield
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This top of the range 400 amp industrial arc welder takes all manner of work in it's stride, from commercial vehicle repairs to security iron-work. - 40 - 400amps (viewing window shows appropriate rod size & current selection). Turbo fan cooling for extended duty cycle, & strong ventilated steel casing. Accepts welding electrodes 1.6mm to 6mm. Thermal overload protection with auto reset. Power input 230/400v, 1ph up to 17Kw. Supplied complete with welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush, wheels & handle, lifting eyes and comprehensive instructions
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An updated version of a proven top range model; the 455TE incorporates the latest technology to further improve upon the renowned dependability and performance of the Clarke 450TE. Abundant power, with features and performance to match, proves this heavy duty machine to be an ideal choice for fabrication workshops, industrial manufacturers & automotive garages. Multiple power settings 30 - 400 amps. Welds mild steel up to 20mm thickness. Turbo fan cooled transformer for extended duty cycle. Auxilliary wire feed unit accepts spools up to 15Kgs - Mild steel, Stainless steel and Aluminium. Accepts wire sizes 0.6 / 0.8mm as standard, plus larger diameters up to 1.2mm with optional wire feed roller. Fullly variable electronic wire speed control 0 - 22M/min, plus timer for consistent spot welding. Operates from 3 phase 400 volt power supply. Supplied with torch/hose assembly, gas regulator, earth lead, face shield and operating instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
110 Bar For Aluminium/Stainless Steel welding
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
60 Bar For Aluminium/Stainless Steel welding
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Quality construction, power and control – the Arc/Tig 132, min 10 Amps max 130 Amps delivers regulated DC power for superior quality ARC welding. Electronically controlled output also facilitates smooth and precise TIG welding. Precision power control, at relatively low amps, means auto bodywork & extremely thin sheets of mild & stainless steel can be Tig welded without risk of causing damage or warping. Supplied with electrode holder with lead, earth clamp and wire brush. Arc welds rutile, low hydrogen and stainless steel electrodes Variable amperage control & Turbo fan cooling Power Factor Correction 0.99 for maximum efficiency and better control for the user Automatic short circuit protection Electronically controlled DC output Light and portable with a tough ventilated steel casing Dimensions (LxWxH) 332x140x185mm, Weight: 6.6 kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A light and compact cap with five integrated ultra bright LED lights, ideal for trade use or for recreational purposes such as camping and fishing. One size fits all with fabric adjuster and brass buckle. Practical, hands-free lighting Internal padding & ventilation Embroidered Clarke logo Requires 2 x 3v lithium coin cell batteries (included) Related Items CTH CTH3 'AAA' Krypton / LED Headlight CTH CTH4AAA 19 Bulb Superbright LED Headlamp
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The CFL20Li is a compact and lightweight, yet powerful cordless LED lamp ideal for a wide range of leisure activities such as camping and is also perfect for the workshop. Featuring 2 brightness modes and beam angle adjustment to suit the needs of every situation. Please Note: Battery CB1500Li and Charger CCH20 sold separately. Lightweight ergonomic design with soft grip handle 2 brightness modes with 6 LED or 12 LED Beam angle adjustment Weight excluding battery: 0.27kg Use with Clarke Lithium ion battery (B1500Li) – not included
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 500 watt, 110 volt floodlight mounted on a compact, lightweight carry frame. Robust aluminium lamp housing with protective steel grill. Steel base & insulated carrying handle with full swivel and tilt facility. Lamp has full swivel and tilt facility. Fitted with 1.5M of yellow arctic cable and 16amp CEE approved 110v plug.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with these powerful twin 500 watt 110 volt floodlights mounted on a 3 section twist lock telescopic mast with three adjustable legs for stability. Robust aluminium lamp housings with protective steel grills and independent weatherproof switches. Full swivel and tilt facility for each lamp. Fitted with 1.8M yellow arctic cable and 16amp round pin CEE approved plug. Adjustable to a height of 2 metres.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Great for lighting building sites, auto repairs, gardens and for emergency use when daylight is at a premium. Can be used indoors and out. The floodlight has twin lamps with individual on/off switches and either 230W or 400W power output. Robust cast aluminium lamps Mounted on an adjustable tilt/swivel bracket Fitted with metal grills to protect clear glass lenses and bulbs from damage and prevent users hands from contact with the hot lenses
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 150 watt, 230 volt floodlight fitted with a pre-drilled wall mounting bracket. Robust aluminium lamp housing.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 150 watt, 230 volt floodlight mounted on a compact lightweight carry frame. Robust aluminium lamp housing with protective steel grill. Full swivel and tilt facility.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 500 watt, 230 volt floodlight with a pre-drilled wall mounting bracket. Robust aluminium lamp housing.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 500 watt, 230v floodlight mounted on a compact lightweight carry frame. Robust aluminium lamp housing with protective steel grill. Full swivel and tilt facility. Fitted with 1.3 metre cable and 13amp plug.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
When you can't have daylight - you can have halogen! Keep things going indoors or out with this powerful 500 watt, 230v floodlight mounted on a 3 section twist lock telescopic mast with three adjustable legs for stability. Robust aluminium lamp housing with protective steel grill and weatherproof on/off switch. Full swivel and tilt facility. Fitted with 1.9 metre cable and 16amp plug. Adjustable to a height of 2 metres.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A bright LED torch with a strong telescopic pick up arm allowing parts to be located and retrieved from hard to reach places with ease. 6 bright LEDs Telescopic adjustable length from 180-705mm Flexible pick up probe end Strong magnet can lift over 1.5lb (680g) depending on material and position. Aluminium body with knurled grip 4 x LR44 cells included
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Featuring excellent build quality, consistent performance, and unbeatable value for money, the 195TEC is a popular machine. Multiple power settings from 30 - 185amps. Welds mild steel up to 7mm. Also accepts aluminium & stainless steel wire. Turbo fan cooling for enhanced duty cycle & longer life. Accepts 0.6 / 0.8mm wire spools up to 15Kg. Fully variable electronic wire speed control plus independent timer for accurate spot/tack welding. Operates from 230v, 1ph power supply. Thermal overload protection with auto reset Supplied complete with professional torch / hose assembly, gas regulator, earth clamp, cables, face shield & full instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A self contained well specified mobile MIG Welder for general repairs and fabrication in automotive workshops and factories. Multiple power settings from 30 - 210amps. Welds mild steel up to 8mm. Also suitable for aluminium & stainless steel wire. Turbo fan cooling for enhanced duty cycle & longer life. Accepts 0.6 / 0.8mm wire up to 15Kg spool. Fully variable electronic wire speed control plus independent timer for accurate spot/tack welding. Operates from 230v, 1 phase power supply. Thermal overload protection with auto reset Supplied complete with professional torch / hose assembly, gas regulator, earth clamp, cables, face shield & full instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The CL6FS work light is ideal for use where the level of light is low in factories, workshops, warehouses etc. Protected by a durable casing, it has a steel stand that can be tilted between 55 - 120 degrees making it easy to direct light to the area it is required. Lightweight and highly portable it includes a comfort grip carry handle. Tilting stand between 55-120° 230Volt Powered by a 13Amp standard 3 pin plug Carry handle and 1.5m cable Dimensions (LxWxH): 220 x 220 x 340mm Weight: 1.5kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
110 Bar For Thin Sheet Metal/Mild Steel/Stainless Steel welding
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
390g Cylinder For Mild Steel welding
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
600g Cylinder For Mild Steel welding
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An extra bright 3W high intensity, long life LED torch. 3 operation modes; full power, half power & flashing light Adjustable control gives a spot to flood beam Water resistant & shock proof Hardened Aluminium construction Requires 4 x 'AA' batteries (not included) Dimensions 232 x 48mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An extra bright 3W high intensity, long life LED torch. 3 operation modes; full power, half power & flashing light Adjustable control gives a spot to flood beam Water resistant & shock proof Hardened Aluminium construction Requires 3 x ‘AAA’ batteries (not included) Dimensions 162 x 40mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An extra bright 3W high intensity, long life LED torch. 3 operation modes; full power, half power & flashing light Adjustable control gives a spot to flood beam Water resistant & shock proof Hardened Aluminium construction Requires 3 x ‘D’ batteries (not included) Dimensions 358 x 53mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An extra bright 3W high intensity, long life LED torch. 3 operation modes; full power, half power & flashing light Adjustable control gives a spot to flood beam Water resistant & shock proof Hardened Aluminium construction Requires 4 x 'AA' batteries (not included) Dimensions 232 x 48mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This powerful multi-bulb head-lamp, fitted with bright Krypton LED's, provides enhanced illumination in numerous situations. A great choice for all manner of different users - trade, DIY or leisure. 6 long-life LED’s Centre focusing bulb Three bulb function facility Adjustable head strap Tilting function - the lamp can be adjusted to illuminate required area Water resistant (non-submersible) Requires 3 x AAA batteries (not included)
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Ultra bright multi-bulb headlight with 19 high-intensity LEDs. Features adjustable elasticated headband for secure fitting and comfort. 19 high intensity LEDs 4 operation modes Tilting headlight requires 4xAAA batteries (not included)
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
An extra bright 3W high intensity, long life LED headlight. Helps increase illumination for various tasks. 2 operation modes; full power or flashing light Retractable and tilting headlight controls focus and angle of light beam Adjustable light strength control Adjustable head strap Rain resistant Hardened Aluminium construction Requires 3 x 'AAA' batteries (not included)
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Bright 28W energy efficient fluorescent work lamp. Great for use in workshops, garages, lofts etc. Versatile lamp, ideal for almost any job requiring extra illumination. An integral power socket is moulded into the casing. includes a folding stand/hanging handle and screw holes for fixing to workbenches, walls etc
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Clarke industrial Arc welders represent the highest standards in metal fusion. The quality and power of the 350TE ensures a consistent performance throughout the day. 55 - 330amps (viewing window shows appropriate rod size & current selection). Turbo fan cooling for extended duty cycle, & strong ventilated steel casing. Accepts welding electrodes 1.6mm to 6mm. Thermal overload protection with auto reset. Power input 230/400v, 1ph up to 10Kw. Supplied complete with welding leads, electrode holder, earth clamp, face shield, chipping pick/wire brush, wheels & handle, and comprehensive instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
24 LED work light with useful hang up hook that is conveniently folded away within a case recess. It also has an inbuilt magnet for locating onto metal objects. Powered by three AA batteries (included) Fold away hook Integral mounting magnet on the back Dims (DWH): 210x60x35mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The CWL2IN1 features a very bright 5W LED with rotating pistol grip handle and 12 SMD LED lantern with hanging handle. 2 mode spotlight: Full and 50% power Surface mount (SMD) lantern LEDs provide high brightness with a wide viewing angle Rubberised pistol grip handle 3 x AA batteries
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
3W COB LED inspection lamp and 0.5W LED torch Lightweight, ideal for workplace, camping, fishing etc Required 3xAAA batteries (not included) Weight: 0.15kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Gas Connection: | Propane | ||
Availability: | Hire / Refill |
A mid-range propane heater offering dual voltage power input and large heat output. Ideal for heating workshops, industrial units and garages. Variable output 91,000 - 149,000 Btu`s/hr (approx. 26.5 to 43.5kW) Complete with regulator & heavy duty gas hose Fuel safety cut out in the event of overheat, flame or power failure Approved to Calor standards Dual voltage 110/230v Dimensions (LWH) 635x270x535mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Heat your workshop, industrial unit or garage with the Clarke Devil 1600 Space Heater which has been designed to provide highly efficient and low cost heating, with the lightweight and portable design which easily allows you to move the heater wherever it’s needed. Supply: 230V/50Hz/Input Power: 110W Variable output control 22 – 36.6kW (75,000 – 125,000 BTU/hr) Fuel safety cut out in the event of overheating, flame or power failure Durable Steel casing Complete with regulator and gas hose Gas Pressure: 300mBar / Air Flow Output: 580m3/hr Dimensions (LWH): 500x215x370mm, Weight: 6.4kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Stay warm at work with the Devil 1610SS Space Heater which provides an impressive 36.6kW output whilst offering a lightweight and portable design to allow you to easily move the heater around. This heater has a polished stainless steel casing for durable design and provides a highly efficient and low cost heating solution. Variable output control 22 – 36.6kW (75,000 – 125,000 BTU/hr) Fuel safety cut out in the event of overheating, flame or power failure Corrosion resistant stainless steel casing Complete with regulator and gas hose Supply: 230V/50Hz /Input Power: 110W Gas Pressure: 300mBar /Air Flow Output: 580m3/hr Product Dimensions (LWH): 500x215x370mm, Weight: 6.4kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The Devil 2100 Space Heater provides a highly efficient and low cost heating solution for industrial places of work such as garages, workshops, warehouses, factories etc. This heater provides a powerful 49.8kW output and a lightweight design to provide an ideal solution to your heating issues. Variable output control 35.2 – 49.8kW (120,000 – 170,000 BTU/hr) Fuel safety cut out in the event of overheating, flame or power failure Complete with regulator and gas hose Supply: 230V/50Hz /Input Power: 135W Gas Pressure: 300mBar /Air Flow Output: 690m3/hr Product Dims (LWH): 640x220x385mm Weight: 8kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Our most powerful heater. This wheel mounted unit is ideal for large workshops, warehouses etc. Variable output 200,000 - 344,000 Btu`s/hr (approx. 58.5 to 100kW) Complete with regulator & heavy duty gas hose Fuel safety cut out in the event of overheat, flame or power failure. Approved to Calor standards Dual voltage 110/230v Dimensions (LWH) 1075x420x565m
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Ideal for heating large areas quickly and efficiently, the Devil 4000 is a propane gas powered heating unit manufactured specifically for spaces such as large workshops, warehouses, industrial units and more. Producing a minimum heat output of 250,000 BTU (70kW) and a maximum heat output of 400,000 BTU (131kW), the Devil 4000 can be adjusted to suit the requirements of the area it's heating and those around it. Featuring fuel safety cut out feature and approved to British and European standards, the Devil 4000 is the perfect large heater for industrial use. Variable output 250,000 - 400,000 BTU/HR (70 - 131 kW) Fuel safety cut out in the event of overheat, flame or power failure Approved to British and European Standards Durable painted steel finish Fitted with wheels and a handle for maneuverability Includes regulator and hose 230v, 50Hz - Dimensions (LWH): 1060x405x620mm - Weight: 21kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Rapid and economical heating for large areas especially garages, workshops and warehouses. Also useful for standby emergency use. Can be used outdoors as well for localised warmth in cold, dry weather. Heat output 51,600 Btu`s/hr (approx. 15.0Kw) Approved to Calor standards Fuel safety cut out in the event of overheating, flame or power failure. Supplied with gas regulator and fuel hose Operates from minimal 230 volt 1ph supply Dimensions (LWH) 490x180x270mm Not suitable for use in residential premises
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Rapid and economical heating for large areas especially garages, workshops and warehouses. Also useful for standby emergency use. Can be used outdoors as well for localised warmth in cold, dry weather. Heat output 50,000 Btu /hr (14.6 kW) Approved to Calor standards Fuel safety cut out in the event of overheating, flame or power failure. Supplied with gas regulator and fuel hose Operates from minimal 230 volt 1ph supply Dimensions (LWH) 425x215x340mm Product Weight: 5.3kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The Devil 900 is guaranteed to keep you warm in the workshop, garage or factory thanks to the impressive 24.9kW output which provides a highly efficient and low cost solution to any heating problem. Lightweight and portable deign that features a carry handle and stand with feet. Variable output control 17.6 – 24.9kW (60,000 – 85,000 BTU/hr) Fuel safety cut out in the event of overheating, flame or power failure Complete with regulator and gas hose Supply: 230V/50Hz/Input Power: 110W Gas Pressure: 300mBar/Gas Consumption: 1.16 to 1.79 kg/hr Air Flow Output: 535m3 Dims (LWH): 500x215x370mm Weight: 6.4kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A portable, easy to use arc welder ideal for the DIY enthusiast or semi professional. Can be used around the house, workshop or garage for general repairs and light fabrication. Variable power control 40 - 100 amps Durable protective steel housing with side ventilators to help maintain duty cycle Accepts welding electrodes 1.6 – 2.5mm broadly matching workpiece thickness Thermal overload protection Operates from 230V, 1ph power supply Dimensions (LWH) 313x172x250mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A portable, easy to use arc welder ideal for the DIY enthusiast or semi professional. Can be used around the house, workshop or garage for general repairs and light fabrication. Variable power control 60 - 200 Amps Durable protective steel housing with side ventilators to help maintain duty cycle Accepts welding electrodes 2 – 4mm broadly matching workpiece thickness Thermal overload protection Operates from 230V, power supply Dimensions (LWH) 498x355x410mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The EasiArc 165 is a portable, easy to use arc welder ideal for the DIY enthusiast or semi-professional. Featuring variable Amp control to meet the requirements of a variety of applications and the ability to accept 2-4mm welding electrodes to broadly match the workpiece thickness. The 165 can be used around the house, workshop or garage and is ideal for general repairs and light fabrication. Complete with a face shield and combination wire brush and hammer, the EasiArc 165 isn't just capable and easy to use, it's great value too.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This useful and highly efficient portable gas heater is a practical & safe way to heat workshops and small to medium sized commercial premises. A lightweight, but non the less heavy duty steel frame & steel mesh guard ensure it is both robust for daily use, and safe to work by too. With no fan or blower, there is also no need to be near an electricity supply making it ideal for site use. 125,000 Btu's/hr heat output (36.6Kw's) No electricity supply required Approx. 2.6 kgs/hr gas consumption 3.6M hose & gas regulator length Super quiet - no need for a blower or fan Tip-over safety switch Dimensions (LWH) 475x400x1090mm. Weight 18kgs
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This highly efficient portable gas heater is a practical & safe way to heat workshops and small to medium sized commercial premises. A lightweight, but non the less heavy duty steel frame & steel mesh guard ensures it is both robust for daily use, and safe to work by too. With no fan or blower, there is also no need to be near an electricity supply making it ideal for site use. 35000 Btu's/hr heat output (10.25Kw's) No electricity supply required Approx. 0.7 kgs/hr gas consumption 3M hose & gas regulator length Super quiet - no need for a blower or fan Tip-over safety switch Dimensions (LWH) 308x230x850mm. Weight 9.2kgs
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A mobile workshop organiser designed especially for welding equipment. Conveniently transports Arc & Mig welders, Plasmas cutters and larger gas bottles, hoses, tools and consumables which otherwise can be awkward to move about. Download Product Manual Accomodates Clarke MIG151TE & smaller hobby MIG welders, Arc welders up to 190TE & Plasma King 35 Sturdy steel construction Heavy duty castors - 2 fixed, 2 swivel Dimensions (LWH) 720x430x780mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Lightweight and highly portable this 230v mains powered, propane gas fired heater is ideal for small workshops or the home garage user. Max output 35,000 Btu`s/hr (approx. 10.25kW) Complete with regulator & heavy duty gas hose Fuel safety cut out in the event of overheat, flame or power failure Approved to Calor, GS & DVGW standards 230v, 1ph power input Dimensions (LWH) 465x210x325mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Lightweight and highly portable this 230v mains powered, propane gas fired heater is ideal for small workshops or the home garage user. Max output 35,000 Btu`s/hr (approx. 10.25kW) Complete with regulator & heavy duty gas hose Fuel safety cut out in the event of overheat, flame or power failure Approved to Calor, GS & DVGW standards 230v, 1ph power input Dimensions (LWH) 465x210x325mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A compact, mobile heater great for instant warmth in the home, office, workshop etc. Relatively inexpensive to run on a ‘pay as you go’ basis. Includes hose & regulator. 3 heat output settings; 1.55kW, 2.9kW, 4.2kW Ignition operated by ‘AAA’ battery (included) Flame failure device
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The best just got better! Easy to set up MIG welder. This model features a professional style, non-live torch which is a distinct advantage for the inexperienced welder. This unit incorporates all the best features of the 150TE which Auto Express voted ‘Best Buy’, in a new up-dated package with a hinged side door and a rotary power selector switch for even easier use. The Turbo, fan cooling feature provides prolonged welding periods at full power making this machine ideal for automotive and non industrial fabrication work. Everything to start welding is included - CO2 gas, regulator, mild steel wire, professional style torch assembly, earth clamp, face shield & helpful user guide / instructions. Power settings from 30 - 150amps. Welds mild steel up to 6mm. 75A @ 60% duty cycle Uses 0.6 / 0.8mm wire up to 5Kg spools. Also accepts aluminium & stainless steel. Fully variable electronic wire speed control. Operates from 230v, single phase power supply (15 amps minimum).Open circuit Volts 18-28V Thermal overload protection with auto reset. - Turbo fan cooling for improved duty cycle & transformer life. Dims (LxWxH) 680x350x470
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-cored wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of the breeze blowing away the shrouding effect of the gas. Power settings from 24 - 90amps. Welds mild steel up to 4mm thickness. Ventilated cooling to maintain duty cycle. Uses 0.6 / 0.9mm wire up to 5Kg spools. Fully variable electronic wire speed control. Thermal overload protection with auto reset. Unit operates from 230v, 13amp domestic power supply. Everything needed for `NO GAS` welding is included - flux coated mild steel wire, professional style torch assembly, earth clamps & face shield. Easily converts to `GAS` MIG welding with optional accessories. Full instructions supplied.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This easy to set up MIG welder is ideal for the DIY enthusiast. It features a professional style, non-live torch which is a distinct advantage for the inexperienced welder and a turbo fan for prolonged welding at full power. It comes in a stylish case with a hinged side door providing access to the wire reel and gas bottle and has power selector switches for easy use. This makes it ideal for DIY car repairs and other jobs around the home. The kit includes everything to get you started - CO2 gas(390g), regulator, mild steel wire, professional type torch assembly, earth clamp, face shield & helpful user guide / instructions. Buying the appropriate gas and wire will enable you to use this unit to weld Stainless Steel or Aluminium. Power settings from 30 to 130amps. Welds mild steel up to 5mm thick. Turbo fan cooling for improved duty cycle & transformer life. Uses 0.6 and 0.8mm wire up to 5kg spool. Fully variable electronic wire speed control. Operates from 230v, single phase power supply. Open circuit Volts 18-26V Thermal overload protection with auto reset. Dims (LxWxH) 680x350x470mm Weight 29kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Ideal for automotive and general fabrication this welder does not require a gas cylinder. Flux cored steel welding wire, produces it’s own gas shroud as it burns allowing this machine to weld steel without gas whilst providing optimum performance and reliability. Producing a maximum power of 90amps it welds mild steel up to 4mm thick. It’s main features include: Professional type torch with full on/off control (not permanently live) Multiple power settings for accurate welding power control Turbo fan cooling for greater efficiency Thermal overload protection Extra tough protective casing Supplied with 1 x welding torch, 2 x 0.9mm torch tips (1 installed in torch) 1 x earth clamp, 1 x two piece welding mask / face shield, 1 x mini spool flux cored wire (0.45kg), 1 x combination wire brush / hammer
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-cored wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas. Power settings from 30 - 100amps. Welds mild steel up to 4mm thickness. Turbo fan cooling for improved duty cycle. Uses 0.6 / 0.9mm wire up to 5Kg spools. Fully variable electronic wire speed control. Thermal overload protection with auto reset. Unit operates from 230v, 13amp domestic power supply. Everything required to start `No Gas` welding is included, flux coated wire, professional style torch assembly, earth clamp & face shield. Converts easily to a conventional `Gas` MIG Welder with optional accessories. Full instructions supplied.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases, it is supplied with a special flux-cored wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it more suitable for outside use since there is less chance of any breeze blowing away the shrouding effect of the gas. Download Product Manual Power settings from 30 - 130 amps. Welds mild steel to 5mm maximum thickness. Turbo fan cooling for improved duty cycle. Uses 0.6 / 0.9mm wire, up to 5kg spools. Fully variable electronic wire speed control. Thermal overload protection with auto-reset. Unit operates from 230v, 1ph power supply. Everything required to start No-Gas welding is included. Flux coated mild steel wire, professional style torch & hose, earth clamp & face mask. Easy conversion to Gas welding with optional accessories. Full details & instructions are supplied.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases with the optional accessories which are sold separately. Power settings from 35 – 135 amps. Welds mild steel 4mm thickness. Turbo fan cooling for greater efficiency Uses 0.6 / 0.8mm wire Fully variable electronic wire speed control Thermal overload protection Extra tough protective edging Operates from 230V power supply.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This powerful 150 amp dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. It can easily be converted to use conventional shielding gases but is supplied with a special flux-cored wire that produces it's own gas shroud as it burns. This feature simplifys its use and makes it ideal for outside working since there is less chance of any breeze blowing away the shrouding effect of the gas. Particularly suited to automotive and light agricultural use. Power settings from 30 - 150amps. Welds mild steel up to 6mm. Also accepts aluminium & stainless steel wire. Turbo fan cooling for improved duty cycle. Uses 0.6 / 0.8 / 0.9mm wire up to 5Kg spool. Fully variable electronic wire speed control. Thermal overload protection with auto reset. Unit operates from 230v, 1ph power supply (30 amps minimum). Everything needed to start 'NO GAS' welding is included - flux coated mild steel wire, professional style torch assembly, earth clamps & face shield. Easily converts to 'GAS' MIG welding with
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This powerful 150 amp dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. It can easily be converted to use conventional shielding gases but is supplied with a special flux-cored wire that produces it's own gas shroud as it burns. This feature allows the machine to weld without gas, simplifying its use and making it ideal for outside use since there is less chance of breeze blowing away the shrouding effect of the gas. Ideal for automotive and light agricultural fabrication work. Download Product Manual Multiple power settings from 30 - 150 amps. Welds mild steel to 6mm maximum thickness. Turbo fan cooling for improved duty cycle. Uses 0.6 / 0.9mm wire, up to 5kg spools. Fully variable electronic wire speed control. Thermal overload protection with auto reset. Unit operates from 230v, 1ph power supply (15 amps minimum). Everything required to start No-Gas welding is included. Flux coated mild steel wire, professional style torch & hose, earth clamp & face mask. Easy conversion to Gas welding with optional accessories. Full details & instructions are supplied.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This MIG welder is easy to set up and is a natural choice of welder for serious DIY enthusiasts or 'semi' professional operators and will also withstand commercial use too. It's fitted with a 'professional style', non-live torch - a distinct advantage for the inexperienced user - and a 'turbo' fan cooled transformer for prolonged welding at full power. All key components are housed in a robust steel case with a hinged side door (provides easy access to the wire reel and gas bottle); the 160TM also has a rotary power selector switch - easy use of course, and delivers up to 150amps (DC) welding current which makes it ideal for heavier gauge steel, particularly car repairs and other fabrication jobs. The kit includes just about everything to get you started - a gas flow regulator, professional type torch assembly, earth clamp, face shield & instruction manual. Buying the appropriate gas and wire will enable you to use this unit to weld Stainless Steel or Aluminium too. Multiple power output settings from 30 to 150 amps. Turbo fan cooled transformer - improves the duty cycle & extends its service life Welds mild steel upto 5mm thick. Welds aluminium & stainless steel with appropriate wire Fully variable electronic wire feed speed control. Accepts wire spools from 5 - 15kg Operates from 230v, 1 phase power supply Thermal overload with auto re-set Supplied with professional torch & hose assembly, gas regulator, earth clamp & cable, face shield & full instructions
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A real value for money, user friendly Metal Inert Gas welder, designed primarily for the home or semi professional user for innumerable mild steel, stainless steel ans aluminium welding & fabrication. Both the latest technology and styling, plus easy-to-use user friendly operational features combine to make this a truly versatile machine for vehicle repairs and metal fabrication. Multiple power settings from 30 to 155 amps 'Turbo' fan cooled transformer enhances duty cycle & improve transformer service life Welds mild steel up to 5 mm. Also suitable for welding aluminium & stainless steel too Fully variable electronic wire speed control. Accepts wire spools from 5 - 15Kg Operates from 230v, 1ph power supply. Thermal overload protection with auto reset. Includes professional torch & hose assembly, gas regulator, earth clamp, cables, face shield & instructions.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
A powerful & up-to-date 170amp Metal Inert Gas welder for fabricating heavier, thicker mild steel structures, car chassis and, thanks to the multiple power settings and a minimum welding ampage of 30 amps, car body work and finer steel pieces too. Designed to reliably serve in automotive garages & body shop, factories and commercial units, farms yards etc the MIG175 guarantees solid performance and is still great value for money. Easy to set up and use, the MIG175 is fitted with a 'professional style', non-live torch - a distinct advantage for the inexperienced user - and a 'turbo' fan cooled transformer for prolonged welding, even at full power. Key components are housed in a robust steel case with a hinged side door (provides easy access to the wire reel and gas bottle); plus it offers easy access to the key controls namely output power and wire feed speed too. Multiple power output settings from 30 to 170 amps. Turbo fan cooled transformer - improves the duty cycle & extends its service life Welds mild steel upto 6mm thick. Welds aluminium & stainless steel with appropriate wire too Fully variable electronic wire feed speed control. Accepts wire spools from 5 - 15kg Operates from 230v, 1ph power supply. Thermal overload with auto re-set Supplied with professional torch & hose assembly, gas regulator, earth clamp & cable, face shield & full instructions
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases. Easy conversion to gas welding with optional accessories. All accessories sold Power settings from 40 – 160 amps. Welds mild steel 5mm thickness. Turbo fan cooling for greater efficiency. Uses 0.6 / 0.8mm wire Fully variable electronic wire speed control Thermal overload protection. Extra tough protective edging Operates from 230V power supply.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This dual purpose machine offers the advantages of standard MIG welding but without the need for gas bottles. Although it can easily be converted to use conventional shielding gases. Easy conversion to gas welding with optional accessories. All accessories sold Power settings from 40 – 180 amps. Welds mild steel 5-6mm thickness. Turbo fan cooling for greater efficiency Uses 0.6 / 0.8 / 1mm wire. Fully variable electronic wire speed control. Thermal overload protection. Extra tough protective edging Operates from 230V power supply.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
For professional automotive and general engineering use, this fully specified intermediate level commercial MIG welder offers reliable performance at a very competitive price Power settings from 40 - 200 amps. Welds mild steel up to 9mm thickness Turbo fan cooling - extended duty cycle Integral wire feed system accepts spools upto 15Kgs (Mild Steel, Stainless Steel & Aluminium Accepts wire sizes 0.6mm & 0.8mm as standard - larger diameters with optional wire feed roller Includes fully variable wire speed control (0 - 22 mtrs/min.) plus timer for spot welding Operates from 30 amp, 1 phase 230v power supply Includes welding torch & hose assembly. gas bottle regulator, earth lead, face shield & operating instructions
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
With its combined power and extended duty cycle, this fully specified MIG welder will cope well in an industrial environment. An excellent choice for a busy autobody repair shop. Power settings 30 - 250amps. Welds mild steel up to 11mm thickness Turbo fan cooling and extra large transformer for improved duty cycle Integral wire feed system accepts spool sizes 5 to 15kgs (mild steel, stainless steel & aluminium) Accepts 0.6mm / 0.8mm as standard - larger diameters with optional wire feed roller Includes fully variable wire speed control 0 - 22 mtrs/min plus timer for spot welding Operates from 30amp, 1 phase 230v power supply Includes welding torch & hose assembly, gas bottle regulator, earth lead, face shield & operating instructions
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This 230v 1Ph plasma cutter is ideal for autobody repairs and slices cleanly through mild/stainless steel, aluminium and copper. With a pilot arc torch, cutting is instant, even on painted surfaces. This unit also has a built in air compressor for greater ease of use. Includes professional on/off torch, earth lead and air filter/regulator. Cutting current: 25 Amps Cutting depth on aluminium and mild steel: 6mm 230v 1Ph, 310v open circuit Dims (LxWxH): 525x175x345mm Weight: 16Kg
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
This 230v 1Ph plasma cutter is ideal for autobody repairs and slices cleanly through mild/stainless steel, aluminium and copper. With a pilot arc torch, cutting is instant, even on painted surfaces. Includes professional on/off torch, earth lead and air filter/regulator. Compressed Air Pressure: 4 - 5 Bar Maximum cutting thickness 10mm on mild steel 12A Minimum 28A maximum 230v 1Ph, 310v open circuit Max power consumption 21A Dimensions LxWxH (mm) 382x155x320 Weight: 9KG
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
DIY car body repairs are made easy with this compact 90amp MIG Welder. This easy to set up MIG welder is the ideal choice for DIY enthusiast. It features a professional style, non-live torch which is a distinct advantage for the inexperienced user and it has a rotary wire feed controler and two power switches for easy use. The 90amp maximum welding power makes it ideal for car repairs and other light fabrication jobs. The kit includes everything to get you started - CO2 gas (390g), regulator, mild steel wire, professional type torch assembly, earth clamp, face shield & helpful user guide / instructions. Buying the appropriate gas and wire will enable you to use this unit to weld Stainless Steel or Aluminium. Power settings from 25 - 90amps. Welds mild steel up to 4mm thickness. Ventilated cooling to maintain duty cycle. Uses 0.6 / 0.8mm wire up to 5Kg spool. Fully variable electronic wire speed control. Operates from 13amp, 230v domestic power supply. Thermal overload protection with auto reset.
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
The RSL30 rechargeable spotlight is extremely lightweight and easy to use. Featuring 30 powerful LEDs, 2 operation modes, auto shut-off, charging indicator and adjustable wrist strap. Complete with a mains charger and cigarette socket charger. Compact, lightweight & easy to use 2 operation modes; full power or flashing light Auto shut-off prevents full battery rundown Charging indicator lights Adjustable wrist strap Includes mains & cigarette socket chargers
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Extremely bright 10 million candle power spotlight, ideal for camping, caravanning, breakdowns, security etc. This portable, rechargeable spotlight provides excellent illumination in either of its modes; full (100W) or half (55W). It also includes a small 8W 270° rotating fluorescent work light and a 12V DC socket which allows the user to power other 12V products. Built in flourescent worklight and 12V DC power outlet Robust, heavy duty rubberised casing 12V 7Ah sealed battery Rechargeable by 230V mains adaptor or 12V in-car charging cable (included) Comes with integral stand and carry strap Weight 4.1kg Dimensions (LxWxH) 360 x 225 x 245mm
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Super bright fluorescent floodlight for electricians, night use on construction sites, tradesmen working without mains electricity etc. Also suitable for roadside use, caravaning and camping. This portable 12v headlamp torch provides wide area illumination for work, leisure and emergency use. Download Product Manual Portable 7Ahr rated sealed battery Can be recharged from mains or 12v vehicle system (both leads included) Battery charge level indicator Detachable power pack with 4M cord Auxiliary 12v output can be used for operating 12v TV`s, radios, laptops, mobile phones etc. Adjustable head - stable base Comfortable grip carry handle
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
36 LED Lithium-ion work light - 36 very bright LEDs, ideal for use in garages for under body inspections or for general illumination of lofts etc. Includes mains and vehicle 12V chargers. Lightweight rechargeable lithium- ion battery Multiple operating modes; flashing, single and double sided illumination. Features two fold-away 360o swivel hanging hooks and integral moveable magnet for hands free applications. Battery: 2x 3.7V Li-ion (7.4V total) Approximate Operating time: 4hrs single side illumination. 2hrs double side illumination. Charging time: 3.5hrs (nominal) 2x 3.7V Li-ion batteries & 12V mains charger
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
With a robust and durable housing, the extra bright 55 LED’s in lamp mode and 3 LED’s in torch mode makes this a flexible light which is ideal for DIY use in garages, workshops, lofts etc. Comes with a 360° swivel hook and a magnet on the reverse for hands-free applications. Supplied with 3 x rechargeable Ni-MH ‘AA’ batteries, 12v in-car and mains chargers. Modes Inspection lamp (white): 33 LED’s Flashing (red): 22 LED’s Torch (white): 3 LED’s Up to 20 hours working time
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Ideal for DIY jobs, leisure use or as an emergency light source. Works as a standard torch, but can be extended/retracted and used as a worklight. 36 Powerful LEDs Lightweight & easy to use Base magnet for stabilising worklight when placed on a ferrous metal surface Charging indicator lights Lasts up to 12 hours Comfort grip handle Includes mains charger & car charger adaptor
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Fully 'independent-of-mains' electricity and arc welding for mobile fabricators and for use on construction sites and other outdoor locations. Rugged construction and reliable, proven components ensure the WH215 is up to the demands of everyday on-site use. Download Product Manual Controlled, adjustable welding output up to 200amps AC Uses electrodes up to 5mm dia. Honda GX390 air cooled, recoil start petrol engine Auxilliary electrical power output - 6.5kVA at 230v, 4kVA at 110v (fitted with 2 x 230v & 2 x 110v sockets) 6.5ltr fuel tank delivers in excess of 2hrs continuous run time 72dB(a) noise level at 7M. Complies fully with EU noise directive Dimensions (LWH) 945x690x685mm. Weight 88kgs
Total Weight: | N/A | Content Weight: | N/A |
---|---|---|---|
Tare Weight: | N/A | Height: | N/A |
Diameter: | N/A | ||
Availability: | Hire / Refill |
Clarke International are Britains biggest privately owned manufacturer and distributor of electrical & mechanical workshop equipment.
View further information about Clarke
Clarke
Clarke International
Hemnall Street
Epping
CM16 4LG
United Kingdom